
Ripsaw Catfish
Oxydoras niger
The Ripsaw Catfish (Oxydoras niger) is a peaceful fish that's best left to experienced keepers. Give it a tank of at least 1700 litres (449 US gallons), water held at 70-75°F, and a pH of 6-7.8.
Captive lifespan reflects typical experience in a home aquarium, not maximum recorded age; genetics, sourcing, and care vary.
Natural distribution
South America
- South America
Regional colours match the stocking calculator's origin map.
Ripsaw Catfish Tank Setup
Plan for at least 1700 litres (449 US gallons) with soft sand or smooth, rounded gravel - sharp substrate wears down their delicate barbels. Keep the water at 70-75°F with a pH around 6-7.8. They grow to around 90 cm, so plan the tank size and filtration for a full-grown adult rather than the small juvenile you see in the shop.
What Do Ripsaw Catfish Eat?
They're bottom feeders, so give them sinking wafers, tablets, or frozen treats like bloodworm once the lights go down. Flakes that never reach the bottom leave them hungry even when the tank looks well-fed.
Ripsaw Catfish Tank Mates
Requires a large tank and good filtration. The Ripsaw Catfish is peaceful, which is the first thing to weigh up when you choose tank mates. At around 90 cm fully grown, it needs tank mates that can hold their own against its size and appetite. Before you buy, run your full stocking list through our stocking calculator. It weighs temperament, adult size, and water needs together, which a single species page can't do on its own.
Are Ripsaw Catfish Good for Beginners?
Not a sensible first purchase. Get the tank cycled, keep easier fish stable for a year, then revisit if you still want the extra work this species demands.
Ripsaw Catfish - frequently asked questions
What size tank do Ripsaw Catfish need?
Ripsaw Catfish need a tank of at least 1700 litres (449 US gallons). A bigger tank is always easier to keep stable, and gives them more room to settle in and behave naturally.
What water parameters do Ripsaw Catfish need?
Keep them at 70-75°F with a pH of 6-7.8, steady rather than chased to an exact figure. In a cycled tank, ammonia and nitrite should both read 0 ppm, with nitrate kept low through regular water changes.
What do Ripsaw Catfish eat?
Ripsaw Catfish are bottom feeders. Give them sinking wafers, tablets, and frozen foods that settle on the substrate, ideally after the lights go off. Feed small amounts once or twice a day, and remove anything they don't eat.
Are Ripsaw Catfish good for beginners?
Ripsaw Catfish are not a beginner species. They need precise conditions and consistent maintenance, so build experience with hardier fish before keeping them.
Common mistakes with Ripsaw Catfish
- Underestimating tank size - the minimum footprint is 1700 litres (449 US gallons); impulse buying into a smaller tank leads to stress and shortened lifespan.
Building a community? Run the full list through the stocking calculator before you add anything else.
Fish to avoid mixing with Ripsaw Catfish
These well-known species are commonly sold alongside this fish but are not recommended tank mates - verify before purchasing.
- OscarPredator - Oscar will eat or injure smaller tank mates
- Colombian Shark CatfishPredator - Colombian Shark Catfish will eat or injure smaller tank mates
- Serpae TetraFin nipper - will shred the fins of peaceful fish










